Upozornenie!
Vitajte na našej novej stránke! Treba sa znova registrovať .
1,51 palcový Transparent OLED, 128×64 Resolution, SPI/I2C Interfaces, light blue color display
1,51 palcový Transparent OLED, 128×64 Resolution, SPI/I2C Interfaces, light blue color display
SKU: 22545
1,51 palcový Transparent OLED, 128×64 Resolution, SPI/I2C Interfaces, light blue color display
1.51inch Transparent OLED, 128×64 Resolution, SPI/I2C Interfaces, Light Blue Color Display
1.51inch Transparent OLED
Embedded Independent Driver Chip, Using SPI/I2C Interfaces
Comes with examples for Raspberry Pi, Arduino, STM32, etc.
Features At A Glance
- OLED transparent module, full viewing angle
- Adopts 4-wire SPI and I2C interface, better compatibility, fast data rate
- Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
Specifications
| OPERATING VOLTAGE | 3.3V / 5V | RESOLUTION | 128 × 64 pixels* |
|---|---|---|---|
| PIXEL PITCH | 0.274 × 0.274mm | MODULE SIZE | 42.04 × 27.22mm |
| COMMUNICATION INTERFACE | 4-wire SPI/I2C | DISPLAY SIZE | 35.05 × 15.32 mm |
| DISPLAY PANEL | OLED | PIXEL SIZE | 0.254 × 0.254 mm |
| DRIVER | Embedded driver | DRIVER BOARD SIZE | 41 × 22.5 mm |
* there is a non-transparent white area on the side of the cable, but it can be displayed
SPI And I2C Control Interface Switching
Supports Controller Boards Like Raspberry Pi/Arduino/STM32
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| DIN | SPI / I2C data input |
| CLK | SPI / I2CI clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
Hardware Connection
Connecting With Raspberry Pi
Connecting With Arduino Board
Usage Example
Outline Dimensions
Weight: 0.018 kg
- 1.51inch Transparent OLED x1
- PH2.0 7PIN cable x1
- Screws pack
Buďte prvý, kto napíše príspevok k tejto položke.
Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.