Upozornenie!

Vitajte na našej novej stránke! Treba sa znova registrovať . 

Získajte tým 5% zľavu!

 

Viac
    Registrácia
    Domov / IoT - moduly / Displeje a zobrazovacie jednotky / Displeje pre Raspberry a Jetson Nano / 3 - 6 palcové displeje / 5 - 6 palcové displeje / 5.79inch e-Paper display (G), e-ink display, 792x272, Red/Yellow/Black/White, With driver board

    5.79inch e-Paper display (G), e-ink display, 792x272, Red/Yellow/Black/White, With driver board

    Neohodnotené
    Značka: Waveshare

    5.79inch e-Paper display (G), e-ink display, 792x272, Red/Yellow/Black/White, SPI Interface With driver board

    SKU: 27846

    Dostupnosť Skladom (2 ks)
    Môžeme doručiť do:
    30.12.2024
    Možnosti doručenia
    Kód: 23548
    33,33 € / ks 27,78 € bez DPH
    5.79inch e-Paper display (G), e-ink display, 792x272, Red/Yellow/Black/White, With driver board
    Neohodnotené
    Značka: Waveshare
    5.79inch e-Paper display (G), e-ink display, 792x272, Red/Yellow/Black/White, With driver board
    14 dní na vrátenie
    14 dní
    na vrátenie tovaru
    Objednávka do 14:00
    Do 14:00 objednané
    ešte dnes odoslané
    Vernostné zľavy 5%
    Vernostné zľavy 5%
    pre registrovaných zákazníkov
    5.79inch E-Paper Display (G), E-Ink Display, 792x272, Red/Yellow/Black/White, SPI Interface
    5.79″ E-Paper (G)

    Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity

    Ideal for price tags, shelf labels, industrial instruments...

     5.79inch e-Paper display (G), front view
    Note: the driver board is optional, please refer to the Package Content for detailed part list
     
     
    • Size5.79″
    • Resolution792×272
    • Viewing Angle>170°
    • Display ColorRed/Yellow/Black/White
    • Grey Scale2
    • CommunicationSPI
    • Display PanelE-paper
    • ExperiencePaper-like
    • EnvironmentAmbient Light Required
    • Display TypePassively Reflective
     
    Version Options
    5.79inch e-Paper (G)

    5.79inch e-Paper (G)
    raw display, without driver board

     
    5.79inch e-Paper Module (G)

    5.79inch e-Paper Module (G)
    with driver board

     
    Features At A Glance
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)
    • Optional for e-Paper driver board:
      • Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Series/Arduino/STM32, etc.
      • Onboard voltage translator, compatible with 3.3V / 5V MCUs
     
    Specifications
    OPERATING VOLTAGE Raw display: 3.3V DISPLAY COLOR Red/Yellow/Black/White
    with driver board: 3.3V/5V
    INTERFACE 3-wire SPI, 4-wire SPI GREY SCALE 2
    OUTLINE DIMENSIONS Raw display: 150.92 × 56.94 × 1.00mm FULL REFRESH TIME 21s
    with driver board: 152.50 × 58.50mm
    DISPLAY SIZE 139.00 × 47.74mm REFRESH POWER <30mW
    DOT PITCH 0.1755 × 0.1755mm STANDBY CURRENT <0.01uA (almost none)
    RESOLUTION 792 × 272 pixels VIEWING ANGLE >170°
    Advantages Of EINK

    E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
    E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

     
    Optional For E-Paper Driver Board

    Onboard SPI Control Interface, For Use With Controller Boards Like Raspberry Pi/Jetson Series/Arduino/STM32

    5.79inch e-Paper display (G) with driver board, onboard SPI control interface
    PWR Power on/off control
    BUSY Busy status output pin
    RST External reset, low active
    DC Data/Command selection (high for data, low for command)
    CS SPI chip selection, low active
    CLK SPI SCK pin
    DIN SPI MOSI pin
    GND Ground
    VCC Power (3.3V / 5V input)
     
    Onboard Voltage Translator

    Compatible With 3.3V / 5V MCUs

    5.79inch e-Paper display (G) with driver board, onboard voltage translator
     
    Usage Example

    Connecting With Raspberry Pi 5

    5.79inch e-Paper display (G) with driver board, connecting with Raspberry Pi 5

    * for reference only, the Raspberry Pi 5 is NOT included.

    Supported Driver Boards For Raw Display
    Universal e-Paper Raw Panel Driver HAT
    e-Paper Driver HAT    		 Click here to purchase
    Universal e-Paper Raw Panel Driver Board, ESP32 WiFi / Bluetooth Wireless
    e-Paper ESP32 Driver Board    		 Click here to purchase
    Universal e-Paper Raw Panel Driver Board, ESP8266 WiFi Wireless
    e-Paper ESP8266 Driver Board    		 Click here to purchase
    Universal e-Paper Raw Panel Driver Shield for Arduino / NUCLEO
    e-Paper Shield    		 Click here to purchase
     
    Application Examples

    Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

     
    Outline Dimensions
    5.79inch e-Paper display (G) and driver board, outline dimensions
     

    PACKAGE CONTENT

    Weight: 0.057 kg

    5.79inch e-Paper Module (G)

    1. 5.79inch e-Paper Module (G) x1
    2. GH1.25 9PIN cable 20cm x1
    15.79inch e-Paper Module (G)
    2

    Buďte prvý, kto napíše príspevok k tejto položke.

    Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.

    Nevypĺňajte toto pole: