Upozornenie!
Vitajte na našej novej stránke! Treba sa znova registrovať .
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
SKU: 26892
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch e-Paper display Module, e-ink display, 792x272, Black/White, SPI Interface
5.79inch E-Paper Display Module, E-Ink Display, 792x272, Black/White, SPI Interface
5.79″ E-Paper Module
Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity
Ideal for price tags, shelf labels, industrial instruments...
- Size
5.79″ - Resolution
792×272 - Viewing Angle
>170° - Display Color
Black/White - Grey Scale
4 - Communication
SPI - Display Panel
E-paper - Experience
Paper-like - Environment
Ambient Light Required - Display Type
Passively Reflective - Refreshing
Partial Refresh Support
Features At A Glance
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Series/Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)
Specifications
| OPERATING VOLTAGE | 3.3V/5V | DISPLAY COLOR | Black/White |
|---|---|---|---|
| INTERFACE | 3-wire SPI, 4-wire SPI | GREY SCALE | 4 |
| OUTLINE DIMENSIONS | 152.50 × 58.50mm | FULL REFRESH TIME | 3.5s |
| DISPLAY SIZE | 139.00 × 47.74mm | PARTIAL REFRESH TIME | 0.8s |
| DOT PITCH | 0.1755 × 0.1755mm | REFRESH POWER | <50mW |
| VIEWING ANGLE | >170° | STANDBY CURRENT | <0.01uA (almost none) |
| RESOLUTION | 792 × 272 pixels | ||
Advantages Of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Onboard SPI Control Interface
For Use With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32
| PWR | Power on/off control |
|---|---|
| BUSY | Busy status output pin |
| RST | External reset, low active |
| DC | Data/Command selection (high for data, low for command) |
| CS | SPI chip selection, low active |
| CLK | SPI SCK pin |
| DIN | SPI MOSI pin |
| GND | Ground |
| VCC | Power (3.3V / 5V input) |
Onboard Voltage Translator
Compatible With 3.3V / 5V MCUs
Usage Example
Connecting With Raspberry Pi 5
* for reference only, the Raspberry Pi 5 is NOT included.
Application Examples
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
Outline Dimensions
PACKAGE CONTENT
Weight: 0.035 kg
- 5.79inch e-Paper Module x1
- GH1.25 9PIN cable 20cm x1
1
2
Buďte prvý, kto napíše príspevok k tejto položke.
Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.