Arduino Giga R1 Wi-Fi

Arduino Giga R1 Wi-Fi

Description :

The Arduino GIGA R1 WiFi brings the power of the STM32H7 to the Mega form factor, being the first Mega board to
include onboard Wi-Fi® and Bluetooth® connectivity. The board provides 76 digital inputs/outputs (12 with PWM
capability), 14 analog inputs and 2 analog outputs (DAC) all easily accessible via pin headers. The STM32
microprocessor with dual-core Cortex® M7 and Cortex® M4, together with onboard memory and audio jack
enables you to perform machine learning and signal processing on the edge.

Features :
STM32H747XIH6 Microcontroller
Dual-core
32-bit Arm® Cortex®-M7 core with double-precision FPU and L1 cache up to 480 MHz
32-bit Arm® 32-bit Cortex®-M4 core with FPU up to 240 MHz
Full set of DSP instructions
Memory Protection Unit (MPU)
Murata® 1DX Wi-Fi®/Bluetooth® Module
Wi-Fi® 802.11b/g/n 65 Mbps
Bluetooth® Low Energy (version 5.X via Cordio stack, version 4.2 via Arduino Stack)
Micro UFL connector for external antenna
Memory
STM32H747XI
2 MB Flash
1 MB RAM
AT25SF128A-MHB-T
16 MB NOR Flash
QSPI Interface
AS4C4M16SA
8 MB SDRAM
I/O
Digital I/O Pins: 76
Analog input pins: 12
PWM pins: 12
Analog output pins (DAC0/DAC1): 2
USB Host: USB 2.0 A
USB Peripheral: USB-C®
Logic level: 3.3V
VRTC: To power the RTC while the board is off
OFF pin: To turn off the board
Communication
4x UART
3x I2C
2x SPI
1x CAN (an external transceiver is required)
Secure Element ATECC608A-MAHDA-T Module
Arduino® GIGA R1 WiFi
3 / 21 Arduino® GIGA R1 WiFi Modified: 05/05/2023
USB
USB Host USB 2.0 Type A
Host
USB Peripheral USB-C®
Programming Port
HID
Connectors
Camera: 20 pin Arducam camera connector
Display: D1N, D0N, D1P, D0P, CKN, CKP, D68-D75
Audio jack: DAC0, DAC1, A7
JTAG connector
Power
Circuit operating voltage: 3.3V
Input voltage (VIN): 6-24V
DC Current per I/O Pin: 8 mA

Datasheet : Datasheet