Upozornenie!

Vitajte na našej novej stránke! Treba sa znova registrovať . 

Získajte tým 5% zľavu!

 

Viac
    Registrácia
    Domov / IoT - moduly / Moduly - prenos a ukladanie dát / GSM / GPS / UMTS / LTE / 5G moduly / EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS

    EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS

    Neohodnotené
    Značka: Waveshare

    EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS

    SKU: 21706

    Dostupnosť Skladom (1 ks)
    Môžeme doručiť do:
    27.11.2024
    Možnosti doručenia
    Kód: 20216
    103,99 € / ks 86,66 € bez DPH
    EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
    Neohodnotené
    Značka: Waveshare
    EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
    14 dní na vrátenie
    14 dní
    na vrátenie tovaru
    Objednávka do 14:00
    Do 14:00 objednané
    ešte dnes odoslané
    Vernostné zľavy 5%
    Vernostné zľavy 5%
    pre registrovaných zákazníkov

    EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS

    EM06-E LTE Cat-6 HAT For Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
    This product is suitable for EMEA / APAC (except Japan and CMCC) / Brazil.
    Feel free to contact us if you need to change to other module, refer to the table below and the supported bands according to your local service provider.
    LTE CAT 6EM06-EEM06-JEM06-A
    Region / ProviderEMEA/APAC/BrazilJapanNorth America/Mexico
    EM06-E LTE CAT-6 HAT FOR RASPBERRY PI

    Supports LTE-A and UMTS/HSPA(+) multi networks

    Multi-Constellation High-Accuracy GNSS, Cloud Platform Communication, LTE-A Networking

    Features At A Glance

    This is an LTE Cat 6 Raspberry Pi communication HAT with GNSS and up to 300Mbps (downlink) / 50Mbps (uplink) data rate. It is applicable for countries/regions including Europe, the Middle East, Africa, Asia-Pacific, Brazil... By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable LTE-A high speed networking, cloud platform communication, SMS, and global GNSS positioning functions.

    • Multi-constellation high-accuracy GNSS positioning: GPS, GLONASS, BeiDou/Compass, Galileo, QZSS
    • Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android
    • USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed LTE-A communication
    • Standard M.2 B KEY slot, compatible with QUECTEL and SIMCOM series 4G/5G M.2 modules
    • Onboard PWR and RST control pin, enabled via DIP switch, for connecting to external IO to turn on/off or reset the module
    • Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
    • Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
    • Reserved 4x SMA to IPEX antenna connectors, easy to install and change the SMA antenna positions
    • High efficiency power supply circuit, up to 3A output current
    Module Specifications
    LTE CAT 6
    Region / ProviderEMEA / APAC (except Japan and CMCC) / Brazil
    Module dimensions42.0 × 30.0 × 2.3 (mm)
    TEMPERATURE RANGE
    Operating temperature-30°C ~ +70°C
    Extension temperature-40°C ~ +85°C
    FREQUENCY BAND
    LTE-FDDB1, B3, B5, B7, B8, B20, B28, B32 (receive only for B32)
    LTE-TDDB38, B40, B41
    2xCAB1+B1, B5, B8, B20, B28;
    B3+B3, B5, B7, B8, B20, B28;
    B7+B5, B7, B8, B20, B28;
    B20+B32 (B32 is used for aux component carrier only), B38+B38, B40+B40, B41+B41
    WCDMAB1, B3, B5, B8
    GNSSGPS/GLONASS/BeiDou (Compass)/Galileo/QZSS
    DATA RATE
    LTE-FDD300 Mbps (DL) / 50 Mbps (UL)
    LTE-TDD226 Mbps (DL) / 28 Mbps (UL)
    DC-HSPA+42 Mbps (DL) / 5.76 Mbps (UL)
    WCDMA384 Kbps (DL) / 384 Kbps (UL)
    Dedicated For IoT/M2M Applications

    Supports LTE-A And UMTS/HSPA(+) Multi Networks

    Applicable For Countries/Regions Including Europe, The Middle East, Africa, Asia-Pacific, Brazil...

    Multi System Support, Easy To Use

    Supports Windows / Linux / Android...

    Just plug it into USB port, go through some simple configuration, the high speed LTE-A network connection will be ready to use

    Connection Examples

    For Windows PC Or Jetson Nano Series, Use A USB Cable
    For Raspberry Pi 4B/3B+, Or CM4-IO-BASE-A/B, Use The Purpose-Made USB Adapter

    connecting with Raspberry Pi 4B

     

    connecting with Raspberry Pi 3B+

     

    connecting with CM4 IO Base

    Multi-Constellation High-Accuracy GNSS

    Supports GPS, GLONASS, BeiDou/Compass, Galileo, QZSS

    Standard Raspberry Pi 40PIN GPIO Header

    Compatible With Raspberry Pi Series And Jetson Nano, Stackable Design For More HATs

    * for reference only, please check the Package Content section for exact part list.

    High Speed Cooling Fan

    Better Heat Dissipation For Both Raspberry Pi And The LTE-A Module

    Standard M.2 B KEY Slot

    Compatible With EM06-E, EM06-J, EM06-A Series Modules

    LTE CAT 6EM06-EEM06-JEM06-A
    Region / ProviderEMEA/APAC①/BrazilJapanNorth America/Mexico
    Operating temperature-30 °C ~ +70 °C
    Extension temperature-40 °C ~ +85 °C
    Dimensions42.0 × 30.0 × 2.3 (mm)
    Power supply3.135V~4.4V, typical 3.7V
    Power consumption50μA @ shutdown
    4.1mA @ hibernate, typical
    22.1mA @ idle
    		47μA @ shutdown
    3.8mA @ hibernate, typical
    19.5mA @ idle    		50μA @ shutdown
    3.8mA @ hibernate, typical
    21.3mA @ idle
    FREQUENCY BAND
    LTE-FDDB1, B3, B5, B7, B8, B20, B28, B32②B1, B3, B8, B18, B19, B26, B28B2, B4, B5, B7, B12, B13, B25, B26, B29②, B30, B66
    LTE-TDDB38, B40, B41B41B41
    2xCAB1+B1, B5, B8, B20, B28;
    B3+B3, B5, B7, B8, B20, B28;
    B7+B5, B7, B8, B20, B28;
    B20+B32②; B38+B38; B40+B40; B41+B41    		B1+B1, B8, B18, B19, B26, B28;
    B3+B3, B8, B18, B19, B26, B28;
    B41+B41    		B2+B2, B5, B12, B13, B29②;
    B4+B4, B5, B12, B13, B29②;
    B7+B5, B7, B12, B26;
    B25+B5, B12, B25, B26;
    B30+B5, B12, B29②;
    B66+B5, B12, B13, B29②, B66;
    B41+B41
    WCDMAB1, B3, B5, B8B1, B3, B6, B8, B19B2, B4, B5
    GNSSGPS / GLONAS S/ BeiDou (Compass) / Galileo / QZSS (configurable)
    DATA RATE
    LTE-FDD300 Mbps (DL); 50 Mbps (UL)
    LTE-TDD226 Mbps (DL); 28 Mbps (UL)
    DC-HSPA+42 Mbps (DL); 5.76 Mbps (UL)
    WCDMA384 kbps (DL); 384 kbps (UL)
    ① except Japan and CMCC;
    ② B29/B32 is only used for receiving in LTE-FDD, while only for aux component carrier wave in 2×CA;
    Comes with EM06-E module by default, for other modules or hardware customization, feel free to contract us.

    What's On Board
    1. Raspberry Pi GPIO header
      for connecting with Raspberry Pi
    2. DIP switches
      Enables the power control and reset pins
    3. M.2 slot
      Compatible with most SIMCom and QUECTEL 4G/5G modules in M.2 form factor
    4. SIM card slot 1
      one of the 2x SIM card slots, dual card single standby
    5. USB3.1 port
      USB 2.0 compatible, for connecting with different hosts
    6. USB Type-C port
      5V 3A input, stable and flexible power supply
     
    1. Audio jack
      SIM7600X/SIM8XXX series supports audio function, but RM5XX/EM06XX series temporarily does not support this function
    2. Antenna connector
      Supports quad antennas
    3. Reset button
    4. Power supply switch
      Switch the power supply mode:
      When set to USB, the module is powered via the "5. USB3.1 port"
      When set to EXT PWR, the module is powered by the external power supply via the "6. USB Type-C port"
    5. Indicator
      Easy to monitor the operating status of module
    1. Cooling fan
      Better heat dissipation for both Raspberry Pi and the 5G module
    2. SIM card slot 2
      Switchable via AT command
    3. Module settings switch
      Switch A to ON for SIM7600X/A7906X/SIM7906X/SIM7912X series 4G M.2 modules;
      Switch B to ON for SIM8202X/SIM8200EA/SIM8262X series 5G M.2 modules;
      Switch C to ON for RM50X/RM520N-GL/EM06X series 5G/LTE-A M.2 modules
     
    1. USB 2.0 interface pads
    2. NAU8810X Audio Chip
      For SIM7600X/SIM8XXX series modules, RM5XX and EM06XX series modules temporarily does not support this function
    3. Fan Header
      5V cooling fan power supply

    Application Examples

    LTE-A Wireless Router
    Combined with OpenWrt, turns the Raspberry Pi into a LTE-A wireless router, providing WiFi hotspot for smartphones to easily access the LTE-A Network.

     

    LTE-A Live Streaming
    While mounting an additional camera, it is able to do live streaming on webpage or live platform through ffmpeg video stream.

    More Possibilities
    Product Show


    Outline Dimensions
    PACKAGE CONTENT

    Weight: 0.204 kg

    The case of this product is NOT included.
    1. M.2 TO 4G/5G HAT x1
    2. EM06-E x1
    3. Antenna 2pcs x1
    4. IPEX adapter cable 2pcs x1
    5. 2*20PIN pin header x1
    6. Passive GPS antenna x1
    7. Dual plug USB3.0 cable x1
    8. USB3.0 adapter x1
    9. USB2.0 adapter x1
    10. SMA protective cap 2pcs x1
    11. Screws pack x1

    Buďte prvý, kto napíše príspevok k tejto položke.

    Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.

    Nevypĺňajte toto pole: