Upozornenie!

Vitajte na našej novej stránke! Treba sa znova registrovať . 

Získajte tým 5% zľavu!

 

Viac
    Registrácia
    Domov / IoT - moduly / Moduly - prenos a ukladanie dát / GSM / GPS / UMTS / LTE / 5G moduly / RM500x / RM502x 5G HAT for Raspberry Pi, quad antennas LTE-A, multi band, RM500Q-GL With Case

    RM500x / RM502x 5G HAT for Raspberry Pi, quad antennas LTE-A, multi band, RM500Q-GL With Case

    Neohodnotené
    Značka: Waveshare

    RM500x / RM502x 5G HAT for Raspberry Pi, quad antennas LTE-A, multi band, RM500Q-GL With Case

    SKU: 22710

    Dostupnosť Zvyčajne do 3-7 dní
    Môžeme doručiť do:
    22.11.2024
    Možnosti doručenia
    Kód: 22549
    379,99 € / ks 316,66 € bez DPH
    RM500x / RM502x 5G HAT for Raspberry Pi, quad antennas LTE-A, multi band, RM500Q-GL With Case
    Neohodnotené
    Značka: Waveshare
    RM500x / RM502x 5G HAT for Raspberry Pi, quad antennas LTE-A, multi band, RM500Q-GL With Case
    14 dní na vrátenie
    14 dní
    na vrátenie tovaru
    Objednávka do 14:00
    Do 14:00 objednané
    ešte dnes odoslané
    Vernostné zľavy 5%
    Vernostné zľavy 5%
    pre registrovaných zákazníkov

    RM500x / RM502x 5G HAT for Raspberry Pi, quad antennas LTE-A, multi band, RM500Q-GL With Case

    RM500x / RM502x 5G HAT For Raspberry Pi, Quad Antennas LTE-A, Multi Band, 5G/4G/3G Compatible
    Raspberry Pi RM500x / RM502x 5G HAT

    Supports 5G/4G/3G

     

    * for reference only, Raspberry Pi board is NOT included

    Features At A Glance
    • Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android
    • USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication
    • Standard M.2 B KEY slot, compatible with different 5G modules: RM500U-CNV / RM500Q-GL / RM500Q-AE / RM502Q-AE series
    • Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
    • Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
    • Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
    • 2x SIM card slot, dual card single standby, switchable via AT command
    • High efficiency power supply circuit, up to 3A output current
    Standard M.2 B KEY Slot

    Compatible With RM500U-CNV, RM500Q-GL, RM500Q-AE, RM502Q-AE, RM520N-GL Series Modules

    5G SUB-6 RM500U-CNV RM500Q-GL RM500Q-AE RM502Q-AE RM520N-GL
     
    5G Standard 3GPP R15 3GPP R16
    Region / Provider China, EMEA, Asia-Pacific Global (except US) Global (except China) Global
    Operating temperature -30 °C ~ +75 °C -30 °C ~ +70 °C
    Extension temperature -40 °C ~ +85 °C
    Dimensions 30.0 × 52.0 (mm)
    FREQUENCY BAND
    5G 5G NR NSA n41, n78, n79 n41, n77, n78, n79 n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 n1, n2, n3, n5, n7, n8, n12, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n71, n75, n76, n77, n78, n79
    5G NR SA n1, n3, n5, n8, n28, n41, n77, n78, n79 n1, n2, n3, n5, n7, n8, n12, n20, n25, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79 n1, n2, n3, n5, n7, n8, n12, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n71, n75, n76, n77, n78, n79
    LTE LTE-FDD B1, B2, B3, B5, B7, B8, B20, B28 B1, B2, B3, B4, B5, B7, B8, B12(B17), B13, B14, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71
    LTE-TDD B34, B38, B39, B40, B41 B34, B38, B39, B40, B41, B42, B43, B48
    LAA - B46
    UMTS WCDMA B1, B2, B5, B8 B1, B2, B3, B4, B5, B6, B8, B19 B1, B2, B4, B5, B8, B19
    GNSS - GPS / GLONASS / BeiDou (Compass) / Galileo
    DATA RATE
    5G SA Sub-6 downlink 2 Gbps;
    uplink 1 Gbps    		 downlink 2.1 Gbps;
    uplink 900 Mbps    		 downlink 2.1 Gbps;
    uplink 450 Mbps    		 downlink 4.2 Gbps;
    uplink 450 Mbps    		 downlink 2.4 Gbps;
    uplink 900 Mbps
    5G NSA Sub-6 downlink 2.2 Gbps;
    uplink 575 Mbps    		 downlink 2.5 Gbps;
    uplink 600/650 Mbps    		 downlink 2.5 Gbps;
    uplink 650 Mbps    		 downlink 5 Gbps;
    uplink 650 Mbps    		 downlink 3.4 Gbps;
    uplink 550 Mbps
    LTE downlink 600 Mbps;
    uplink 150 Mbps    		 downlink 1.0 Gbps;
    uplink 200 Mbps    		 downlink 1.0 Gbps;
    uplink 200 Mbps    		 downlink 2 Gbps;
    uplink 200 Mbps    		 downlink 1.6 Gbps;
    uplink 200 Mbps
    UMTS downlink 42.2 Mbps;
    uplink 11 Mbps    		 downlink 42 Mbps;
    uplink 5.76 Mbps
     
    Supports 5G/4G/3G Networking

    Support 5G NSA (4G And 5G Co-Networking) And SA (5G Separate Networking)
    Support 4G/3G Internet

    * the frequency band diagram above is for reference only, please confirm the supported bands according to your local service provider.

    Multi System Support, Easy To Use

    Supports Windows / Linux / Android...

    Just plug it into USB port, go through some simple configuration, the high speed 5G network connection will be ready to use

    Connection Examples

    For Windows PC Or Jetson Nano Series, Use A USB Cable
    For Raspberry Pi 5/4B/3B+, Or CM4-IO-BASE-A/B, Use The Purpose-Made USB Adapter

    connecting with Raspberry Pi 5

     

    connecting with Raspberry Pi 4B

     

    connecting with Raspberry Pi 3B+

     

    connecting with CM4 IO Base

     
    Cloud Communication
    Multi-Constellation High-Precision GNSS

    Supports GPS, Beidou, Glonass, Galileo

    Note: GNSS is not available for RM500U-CNV module.
     
    Standard Raspberry Pi 40PIN GPIO Header

    Compatible With Raspberry Pi Series And Jetson Nano, Stackable Design For More HATs

    * for reference only, please check the Package Content section for exact part list.
     
    High Speed Cooling Fan

    Better Heat Dissipation For Both Raspberry Pi And The 5G Module

     
    What's On Board
    1. Raspberry Pi GPIO header
      for connecting with Raspberry Pi
    2. DIP switches
      Enables the power control and reset pins
    3. M.2 slot
      Compatible with most SIMCom and QUECTEL 4G/5G modules in M.2 form factor
    4. SIM card slot 1
      one of the 2x SIM card slots, dual card single standby
    5. USB3.1 port
      USB 2.0 compatible, for connecting with different hosts
    6. USB Type-C port
      5V 3A input, stable and flexible power supply
     
    1. Audio jack
      SIM7600X/SIM8XXX series supports audio function, but RM5XX/EM06XX series temporarily does not support this function
    2. Antenna connector
      Supports quad antennas
    3. Reset button
    4. Power supply switch
      Switch the power supply mode:
      When set to USB, the module is powered via the "5. USB3.1 port"
      When set to EXT PWR, the module is powered by the external power supply via the "6. USB Type-C port"
    5. Indicator
      Easy to monitor the operating status of module
    1. Cooling fan
      Better heat dissipation for both Raspberry Pi and the 5G module
    2. SIM card slot 2
      Switchable via AT command
    3. Module settings switch
      Switch A to ON for SIM7600X/A7906X/SIM7906X/SIM7912X series 4G M.2 modules;
      Switch B to ON for SIM8202X/SIM8200EA/SIM8262X series 5G M.2 modules;
      Switch C to ON for RM50X/RM520N-GL/EM06X series 5G/LTE-A M.2 modules
     
    1. USB 2.0 interface pads
    2. NAU8810X Audio Chip
      For SIM7600X/SIM8XXX series modules, RM5XX and EM06XX series modules temporarily does not support this function
    3. Fan Header
      5V cooling fan power supply
     
    Optional Case

    Multiple Installation Methods, Convenient For Various Application Such As Industry

    * The case is optional and only suitable for Raspberry Pi 4B, please choose a proper option before placing order

     
    Application Examples

    5G Wireless Router
    Combined with OpenWrt, turns the Raspberry Pi into a 5G wireless router, providing WiFi hotspot for smartphones to easily access the 5G Network.

     

    5G Live Streaming
    While mounting an additional camera, it is able to do live streaming on webpage or live platform through ffmpeg video stream.

    More Possibilities
    Outline Dimensions
     
    Resources & Services

    PACKAGE CONTENT

    Weight: 0.586 kg

    RM500x / RM502x 5G HAT

    1. OPTIONS Protection case kit x1
    2. M.2 TO 4G/5G HAT x1
    3. OPTIONS 5G Module x1
    4. Antenna 4pcs x1
    5. IPEX adapter cable 4pcs x1
    6. OPTIONS GNSS antenna x1
      * This antenna is NOT included in the RM500U-CNV kit which has no GNSS function
    7. 2*20PIN pin header x1
    8. OPTIONS 5V 3A Type-C power adapter x1
    9. Dual plug USB3.0 cable x1
    10. USB3.0 adapter x1
    11. USB2.0 adapter x1
    12. SMA protective cap 4pcs x1
    13. Screws pack x1

    Buďte prvý, kto napíše príspevok k tejto položke.

    Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.

    Nevypĺňajte toto pole: