Upozornenie!
Vitajte na našej novej stránke! Treba sa znova registrovať .
VisionFive2 RISC-V Single Board Computer, StarFive JH7110 Processor with Integrated 3D GPU, base on Linux 4GB
SKU: 23905
VisionFive2 RISC-V Single Board Computer, StarFive JH7110 Processor with Integrated 3D GPU, base on Linux 4GB
Kit | the VisionFive2 board only | the VisionFive2 board with WIFI module | Starter Kit | Starter Kit with WIFI module | Display Kit | Display Kit with WIFI module | Starter Box Kit | Starter Box Kit with WIFI module |
VisionFive2 4GB/8GB | √ | √ | √ | √ | √ | √ | √ | √ |
WIFI module | √ | √ | √ | √ | ||||
Starter Kit Accessories Pack: (UART Module, 32GB TF Card, Card Reader, 3PIN Cable, 5V/3A Type-C Power Supply) | √ | √ | √ | √ | √ | √ | ||
Display Kit Accessories Pack: (7inch HDMI LCD (H), HDMI cable, HDMI adapter, USB cable, screws pack) | √ | √ | ||||||
Metal Case + Cooling Fan | √ | √ |
VisionFive2
Options for 4GB/8GB RAM
VisionFive2 with WIFI module
with WIFI module, options for 4GB/8GB RAM
Metal case for VisionFive2
Metal case + cooling fan
(can be purchased separately)
VisionFive2 Starter Kit (WIFI module optional)
This kit includes VisionFive2 (options for 4GB/8GB RAM), WIFI module (optional) and Starter Kit Accessories Pack, which includes a UART module, 32GB TF card, card reader, 3PIN cable and 5V 3A Type-C power supply, to get users started with VisionFive2 quickly.
VisionFive2 Display Kit (WIFI module optional)
On the basis of the starter kit, it is equipped with Display Kit Accessories Pack including a 7inch HDMI display, HDMI adapter, HDMI cable, USB cable and screws pack. With the 1024 × 600 resolution wide view angle touch screen, this kit can meet more application scenarios that require display function.
VisionFive2 Starter Box Kit (WIFI module optional)
On the basis of the starter kit, it is equipped with a metal case and cooling fan, which not only protects the internal control board and components, but also effectively dissipates heat from the control board for more stable operation.
PROCESSOR | StarFive JH7110 | ||
---|---|---|---|
CPU | RISC-V U74 Quad-core 64-bit RV64GC ISA SoC With 2MB L2 cache and S7 core, operating frequency up to 1.5GHz | ||
GPU | IMG BXE-4-32 MC1, operating frequency up to 600MHz | ||
MEMORY | Options for 4G/8G Byte LPDDR4 | ||
STORAGE | TF card (included in the Display Kit, Starter Kit and Starter Box Kit) | ||
CAMERA | MIPI CSI 2lane 1080p@30fps | ||
DISPLAY | 1 × 2-lane MIPI DSI 1080p@30fps 1 × 4-lane MIPI DSI 2K@30fps (Only one DSI port can be used for display at the same time) 1 × HDMI 2.0 4K@30fps, 2K@60fps | ||
USB HOST | 4 × USB 3.0 Type-A port | ||
USB DEVICE | 1 × USB Device (multiplexed with the USB Type-C port) | ||
NETWORKING | 2 × Gigabit Ethernet port (1-ch with PoE function) | ||
RESET BUTTON | Press the reset button to reboot when in the U-boot mode; Press and hold the reset button for three seconds to reboot after the system boots | ||
BOOT MODE SWITCH | RGPIO_1 | RGPIO_0 | Boot Mode |
0 | 0 | flash | |
0 | 1 | TF Card | |
1 | 0 | eMMC | |
1 | 1 | UART | |
DEBUG PIN HEADERS | Multiplex pin 8 and pin 10 (physical address) on the 40PIN header, for UART TX and UART RX functions | ||
USB TYPE-C POWER PORT | Supports Quick Charge input 5V DC (minimum 3A) (up to 30 W) Supports 5~20V fixed voltage input Supports USB Type-C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Supports QC 3.0/2.0 adapter, 9V/2A, 12V/1.5A | ||
OTHER POWER SUPPLY | 5V input via 40PIN GPIO header PoE port power input, requires external PoE module | ||
OTHER INTERFACES | 40PIN GPIO M.2 M-Key Solid State Drive socket eMMC socket 2PIN Fan header 3.5mm Audio Jack, 4-pole stereo audio jack | ||
DIMENSIONS | 100 × 74 × 21mm | ||
COMPLIANCE | RoHS, FCC, CE | ||
RECOMMENDED OPERATING AMBIENT TEMPERATURE | 0~50℃ (If the operating temperature of the chip exceeds 85°C, the frequency and voltage of the CPU will be automatically reduced for cooling) |
Powerful Performance, Open Source Application Environment, And Rich Software Ecology
More Possibilities For VisonFive 2
Each Cut-Out Is Completely Aligned With The Board Interfaces
* for reference only, the rail accessories are Not included
* for reference only, please refer to the Package Content for the detailed part list
* All GPIO pins can be multiplexed to support different functions including
SDIO, Audio, DMIC, SPI, I2C, UART, PWM, CAN
* for reference only, please refer to the Package Content for the detailed part list
Buďte prvý, kto napíše príspevok k tejto položke.
Len registrovaní používatelia môžu pridávať príspevky. Prosím prihláste sa alebo sa zaregistrujte.